Product Details
Place of Origin: Guangdong, China, guangdong, China
Brand Name: HW
Model Number: CE8850-HAM Series, CloudEngine S5755-H Series
Payment & Shipping Terms
Minimum Order Quantity: 2 pieces
Price: $2,000.00 - $12,000.00/pieces
Packaging Details: 1,Carton packing or wooden case packing according to customer requirements
2,Sufficient protective materials are added to the packing box to effectively prevent the product from being damaged due to turbulence during transportation.
Supply Ability: 1000 Carton/Cartons per Day
Private Mold: |
NO |
Products Status: |
Stock, Stock |
Ports: |
40 |
Transmission Rate: |
100/200/400GE |
Function: |
LACP, POE, QoS, SNMP, Stackable, VLAN Support, SNMP, VLAN Support |
Communication Mode: |
Full-Duplex & Half-Duplex |
Switch Capacity: |
19.2Tbit/s |
Product Description: |
8x10/100/1000Base-T Ethernet Port, 4 10 Gigabits SFP+ |
Switching Capacity: |
19.2Tbit/s |
Rack Units: |
1RU |
Warranty: |
1 Years |
Condition: |
100% Brand New S5735-L8T4S-A1 |
Port: |
Tianjin,Qingdao |
Private Mold: |
NO |
Products Status: |
Stock, Stock |
Ports: |
40 |
Transmission Rate: |
100/200/400GE |
Function: |
LACP, POE, QoS, SNMP, Stackable, VLAN Support, SNMP, VLAN Support |
Communication Mode: |
Full-Duplex & Half-Duplex |
Switch Capacity: |
19.2Tbit/s |
Product Description: |
8x10/100/1000Base-T Ethernet Port, 4 10 Gigabits SFP+ |
Switching Capacity: |
19.2Tbit/s |
Rack Units: |
1RU |
Warranty: |
1 Years |
Condition: |
100% Brand New S5735-L8T4S-A1 |
Port: |
Tianjin,Qingdao |
Mainframe | ||
CE8850-HAM | CE8850-HAM switch (32*100GE QSFP28,without fan and power modules) (CM) | |
CE8850-HAM-B | CE8850-HAM switch (32*100GE QSFP28, 2*AC power modules, 6*fan modules, port-side intake) (CM) | |
CE8850-HAM-F | CE8850-HAM switch (32*100GE QSFP28, 2*AC power modules, 6*fan modules, port-side exhaust) (CM) | |
Item | CloudEngine 8850-HAM | |
40/100GE QSFP28 ports | 32 | |
200GE QSFP56 ports1 | 32 | |
400GE QSFP-DD ports1 | 8 | |
Switching capacity (Tbps) | 19.2Tbit/s | |
Forwarding performance (Mpps) | 4350 mpps | |
Airflow direction | Front-to-back or back-to-front | |
Device virtualization | M-LAG | |
DCI | VXLAN mapping, multi-DC connectivity at Layer 2 | |
Network virtualization | VXLAN routing and VXLAN bridging | |
BGP EVPN | ||
SDN | iMaster NCE-Fabric | |
Network convergence | PFC and AI ECN | |
RDMA and RoCE (RoCE v1 and RoCE v2) | ||
Programmability | OPS programming | |
Ansible-based automatic configuration and open-source module release | ||
Traffic analysis | NetStream | |
VLAN | Adding access, trunk, and hybrid interfaces to VLANs | |
Default VLAN | ||
MAC address | Dynamic learning and aging of MAC address entries | |
Static, dynamic, and blackhole MAC address entries | ||
Packet filtering based on source MAC addresses | ||
MAC address limiting based on ports and VLANs | ||
IP routing | IPv4 routing protocols, such as RIP, OSPF, IS-IS, and BGP | |
IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ | ||
Policy-based routing | ||
IPv6 | VXLAN over IPv6 | |
IPv6 VXLAN over IPv4 | ||
IPv6 Neighbor Discovery (ND) | ||
Path MTU Discovery (PMTU) | ||
TCP6, IPv6 ping, IPv6 tracert, IPv6 socket, UDP6, and raw IPv6 | ||
Multicast | Multicast routing protocols such as IGMP, PIM-SM, PIM-DM, and MSDP | |
IGMP snooping | ||
IGMP proxy | ||
Fast leaving of multicast member interfaces ，and supports MoFRR | ||
Multicast traffic suppression | ||
QoS | Traffic classification based on Layer 2, Layer 3, Layer 4, and priority information | |
ACL, CAR, re-marking, and scheduling | ||
Queue scheduling modes such as PQ, DRR, and PQ+DRR | ||
Congestion avoidance mechanisms, including WRED and tail drop | ||
Traffic shaping | ||
Intelligent O&M | IEEE 1588 v2 | |
Network-wide path detection | ||
Telemetry, gRPC-based proactive high-speed data reporting | ||
ERSPAN+ | ||
IOAM | ||
AnyFlow | ||
Intelligent traffic analysis | ||
Packet event: packet loss visualization and latency visualization | ||
Statistics on the buffer microburst status | ||
VXLAN OAM: VXLAN ping and VXLAN tracert | ||
Dimensions (W x D x H) | 43.6 mm x 442 mm x 600 mm (1.72 in. x 17.4 in. x 23.62 in.) | |
Weight (full configuration) | 12.2 kg (26.90 lb) | |
Environment specifications | Long-term operating temperature (°C): 0°C to 40°C (0- 1800 m) Storage temperature (°C): –40°C to +70°C Relative humidity: 5% RH to 95% RH, non-condensing | |
Operating voltage | AC: 90 V to 290 V | |
Maximum power consumption | 32 x 200GE + 8 x 400GE: 1152 W (100% traffic load, all downlink ports with 6.5 W 200GE optical modules, all uplink ports with 12 W 400GE optical modules, 40°C, dual power modules) 32 x 100GE + 8 x 400GE: 973 W (100% traffic load, all downlink ports with 5 W 100GE optical modules, all uplink ports with 12 W 400GE optical modules, 40°C, dual power modules) | |
By default, the CE8850-HAM supports only 32 x 100GE ports. To use 8 x 400GE QSFP-DD ports, purchase the CE88-RTU-8DQ hardware RTU.To upgrade to 32 x 200GE ports, purchase the CE88-RTU-U32CQ hardware RTU. | ||
Tags:
